[1] Czajkowski, Ł., Olek, W., & Weres, J. (2020). Effects of heat treatment on thermal properties of European beech wood.
European Journal of Wood and Wood Products,
78(3), 425-431.
https://doi.org/10.1007/s00107-020-01525-w
[2] Brunetti, M., Nocetti, M., Pizzo, B., Aminti, G., Cremonini, C., Negro, F., Zanuttini, R., Romagnoli, M., & Scarascia Mugnozza, G. (2020). Structural products made of beech wood: quality assessment of the raw material.
European Journal of Wood and Wood Products,
78(5), 961-970.
https://doi.org/10.1007/s00107-020-01542-9
[3] Fathi, H., Nasir, V., & Kazemirad, S. (2020). Prediction of the mechanical properties of wood using guided wave propagation and machine learning.
Construction and Building Materials,
262.
https://doi.org/10.1016/j.conbuildmat.2020.120848
[4] Akrami, A., Barbu, M. C., & Fruehwald, A. (2014). Characterization of properties of oriented strand boards from beech and poplar.
European Journal of Wood and Wood Products,
72(3), 393-398.
https://doi.org/10.1007/s00107-014-0793-9
[5] Bayranvand, M., Kooch, Y., & Alberti, G. (2018). Classification of humus forms in Caspian Hyrcanian mixed forests ecoregion (Iran): Comparison between two classification methods.
Catena,
165, 390-397.
https://doi.org/10.1016/j.catena.2018.02.021
[6] Tsioras, P. A., & Liamas, D. K. (2015). Residual tree damage along skidding trails in beech stands in Greece.
Journal of Forestry Research,
26(2), 523-531.
https://doi. org/10.1007/s11676-015-0056-6
[7] Gryc, V., Vavrčík, H., & Gomola, Š. (2008). Selected properties of European beech (Fagus sylvatica L.).
Journal of forest science,
54(9), 418-425.
https://www. agriculturejournals.cz/web/jfs.htm?type=article&id=59_2008-JFS
[8] Standovár, T., & Kenderes, K. (2003). A review on natural stand dynamics in beechwoods of East Central Europe. Applied ecology and environmental research, 1(1), 19-46.
[9] Torkaman, J., Vaziri, M., Sandberg, D., & Mohammadi Limaei, S. (2018). Relationship between branch-scar parameters and knot features of oriental beech (Fagus orientalis Libsky).
Wood Material Science & Engineering,
13(2), 117-120.
https:// doi.org/10.1080/17480272.2018.1424731
[10] Nasir, V., Nourian, S., Avramidis, S., & Cool, J. (2018). Prediction of physical and mechanical properties of thermally modified wood based on color change evaluated by means of "group method of data handling" (GMDH) neural network.
Holzforschung,
73(4), 381-392.
https://doi.org/10.1515/hf-2018-0146
[11] Perlin, L. P., Pinto, R. C. d. A., & Valle, Â. d. (2019). Ultrasonic tomography in wood with anisotropy consideration.
Construction and Building Materials,
229.
https:// doi.org/10.1016/j.conbuildmat.2019.116958
[12] López, G., Basterra, L. A., & Acuña, L. (2013). Estimation of wood density using infrared thermography.
Construction and Building Materials,
42, 29-32.
https://doi. org/10.1016/j.conbuildmat.2013.01.001
[13] Barreira, E., & de Freitas, V. P. (2007). Evaluation of building materials using infrared thermography.
Construction and Building Materials,
21(1), 218-224.
https://doi. org/10.1016/j.conbuildmat.2005.06.049
[14] Sandak, J., Sandak, A., & Riggio, M. (2015). Multivariate analysis of multi-sensor data for assessment of timber structures: Principles and applications.
Construction and Building Materials,
101, 1172-1180.
https://doi.org/10.1016/j.conbuildmat.2015.06.062
[15] Riggio, M., Sandak, J., Sandak, A., Pauliny, D., & Babiński, L. (2014). Analysis and prediction of selected mechanical/dynamic properties of wood after short and long-term waterlogging.
Construction and Building Materials,
68, 444-454.
https://doi. org/10.1016/j.conbuildmat.2014.06.085
[16] Beall, F. C. (2002). Overview of the use of ultrasonic technologies in research on wood properties.
Wood Science and Technology,
36(3), 197-212.
https://doi.org/10.1007/ s00226-002-0138-4
[17] Nasir, V., Nourian, S., Avramidis, S., & Cool, J. (2019). Stress wave evaluation for predicting the properties of thermally modified wood using neuro-fuzzy and neural network modeling.
Holzforschung,
73(9), 827-838.
https://doi.org/doi:10.1515/hf-2018-0289
[18] Bektas, I., Guler, C., & Baştürk, M. A. (2002). Principal mechanical properties of Eastern beech wood (Fagus orientalis Lipsky) naturally grown in Andırın Northeastern Mediterranean region of Turkey.
Turkish Journal of Agriculture and Forestry,
26(3), 147-154.
https://journals.tubitak.gov.tr/agriculture/issues/tar-02-26-3/tar-26-3-6-0107-1.pdf
[19] Campean, M., Marinescu, I., & Ispas, M. (2007). Influence of drying temperature upon some mechanical properties of beech wood.
Holz als Roh- und Werkstoff,
65(6), 443-448.
https://doi.org/10.1007/s00107-007-0193-5
[20] Kretschmann, D. (2010). Mechanical properties of wood.
Wood handbook: wood as an engineering material: chapter 5. Centennial ed. General technical report FPL; GTR-190. Madison, WI: US Dept. of Agriculture, Forest Service, Forest Products Laboratory, 5.1-5.46.
https://www.fs.usda.gov/treesearch/pubs/37427
[21] Lo Monaco, A., Calienno, L., Pelosi, C., Balletti, F., Agresti, G., & Picchio, R. (2014). Technical properties of beech wood from aged coppices in Central Italy.
iForest - Biogeosciences and Forestry,
8(1), 82-88.
https://doi.org/10.3832/ifor1136-007
[22] Pöhler, E., Klingner, R., & Künniger, T. (2006). Beech ( Fagus sylvatica L.) – Technological properties, adhesion behaviour and colour stability with and without coatings of the red heartwood.
Annals of Forest Science 63(2), 129-137.
https://doi. org/10.1051/forest:2005105
[23] Simsek, H., Baysal, E., & Peker, H. (2010). Some mechanical properties and decay resistance of wood impregnated with environmentally-friendly borates.
Construction and Building Materials,
24(11), 2279-2284.
https://doi.org/10.1016/j.conbuildmat.2010.04.028
[24] Taj, M. A., Kazemi, S., & Ebrahimi, G. (2009). Withdrawal and lateral resistance of wood screw in beech, hornbeam and poplar.
Holz als Roh- und Werkstoff,
67(2), 135-140.
https://doi.org/10.1007/s00107-008-0294-9
[25] Yilgor, N., Unsal, O., & Kartal, S. (2001). Physical, mechanical, and chemical properties of steamed beech wood.
Forest Products Journal,
51, 89-93.
https://eurekamag. com/research/003/883/003883463.php
[26] Saurat, J., & Gueneau, P. (2004). Growth stresses in beech.
Wood Science and Technology,
10, 111-123.
https://doi.org/10.1007/BF00416786
[27] Fazeli, A., & Talaei, A. (2020). A Study of the Physical and Mechanical Properties of Scots Pine Fire Retardant Treated Thermowood.
Karafan Quarterly Scientific Journal,
17(2), 51-63.
https://doi.org/10.48301/kssa.2020.119212
[28] Hassanpoor Tichi, A., & Rezanezhad Divekolae, M. (2021). Comparing the anatomical and biometrical characteristics of heartwood and sapwood of Elaeagnus angustifolia (case study Khorasan province).
Karafan Quarterly Scientific Journal.
https:// karafan.tvu.ac.ir/article_129725.html?lang=en
[29] Hassanpoor Tichi, A., Rezanezhad Divkolae, M., Khatiri, A., & Alizadeh, R. (2020). Investigation of Changing Trends in Morphological and Anatomical Characteristics of fraxinus excelsior in Stem Radial Axis (Case Study: Mazandaran Province).
Karafan Quarterly Scientific Journal,
17(2), 81-91.
https://doi.org/10.48301/kssa.2020.119214
[30] Bektas, I., & Guler, C. (2001). The determination of some physical properties of beech wood (Fagus orientalis Lipsky.) in the Andırın region.
Turkish Journal of Agriculture and Forestry,
25(4), 209-215.
https://www.semanticscholar.org/paper/The-Determination-of-Some-Physical-Properties-of-in-Bektas-Guler/73e74746b12e54568c7c32360ec89 b 8c5ecb099a
[31] Skarvelis, M., & Mantanis, G. (2012). Physical and mechanical properties of beech wood harvested in the Greek public forests.
Wood research,
58(1), 123-130.
https://www.researchgate.net/publication/237840835_Physical_and_mechanical_properties_of_beech_wood_harvested_in_the_Greek_public_forests
[32] Golbabaei, F., Nourbakhsh, A., Fakhrian Roghani, A., & Fallah Doost, S. (2004). Changes in engineering properties of beech wood in Sangdeh forests (Mazandaran).
Iranian Wood and Paper Science Research,
19(2), 175-192.
https://www.sid.ir/fa/ journal/ViewPaper.aspx?ID=64126
[33] Sadoh, T., & Christensen, G. N. (1967). Longitudinal shrinkage of wood — Part I: Longitudinal shrinkage of thin sections.
Wood Science and Technology,
1(1), 26-44.
https://doi.org/10.1007/BF00592254
[34] Zhang, S. (1997). Wood specific gravity-mechanical property relationship at species level.
Wood Science and Technology,
31(3), 181-191.
https://link.springer.com/ article/10.1007/BF00705884
[35] Yu, L., Liang, Y., Zhang, Y., & Cao, J. (2019). Mechanical properties of wood materials using near-infrared spectroscopy based on correlation local embedding and partial least-squares.
Journal of Forestry Research,
31(3), 1053-1060.
https://doi.org/10. 1007/s11676-019-01031-7
