@article { author = {Najafian Ashrafi, Mohammad and Shaabani Asrami, Hooman and Vosoughi Rudgar, Zeynolabedin and Ghorbanian Far, Mohammad and Dehghan, Moein}, title = {Investigation of Physical and Mechanical Properties of Iranian and Imported Georgian Beech Wood}, journal = {Karafan Quarterly Scientific Journal}, volume = {18}, number = {4}, pages = {215-225}, year = {2022}, publisher = {Technical and Vocational University}, issn = {2382-9796}, eissn = {2538-4430}, doi = {10.48301/kssa.2021.290643.1576}, abstract = {Wood and wooden products are one of the most important materials that have been traditionally used for building constructions. In this study, Mazandaran Sangdeh Beech and imported Georgian Beech wood were used. Physical properties (including dry and critical densities, shrinkage and swelling) and mechanical properties (including bending strength, modulus of elasticity, compression parallel to grain, shear parallel strength to grain, tensile strength parallel and perpendicular to grain, screw withdrawal strength and hardness) were investigated. Physical and mechanical tests were performed according to international standard methods such as ISO 3129 (2012) and ASTM (D143-14). The moisture content of all samples was 12% during mechanical tests. The mean dry densities of Sangdeh and Georgian beech were 0.61(g/cm3) and 0.65(g/cm3), respectively. The result showed that significant differences were observed among the properties of the mentioned species after T-test, except in critical density, radial shrinkage and radial swelling. Moreover, the obtained strengths of Georgian timber were significantly higher than the Iranian beech, which was attributed to the higher density of Georgian timber.}, keywords = {Beech wood,Density,Mechanical properties,physical properties}, title_fa = {بررسی خصوصیات فیزیکی و مکانیکی چوب راش ایران و الوارهای وارداتی راش گرجستان}, abstract_fa = {چوب و محصولات چوبی به دلیل مقاومت‌های بسیار بالا، یکی از مهم‌ترین محصولات مورد استفاده در ساختمان‌سازی در سراسر جهان است. در این پژوهش از چوب راش سنگده مازندران و الوارهای وارداتی راش گرجستان استفاده شد. خواص فیزیکی شامل (دانسیته خشک و بحرانی، هم‌کشیدگی و واکشیدگی) و خواص مکانیکی شامل (مقاومت خمشی، مدول الاستیسیته، فشار موازی به الیاف، برش موازی به الیاف، کشش موازی و عمود به الیاف، مقاومت به نگه­داری پیچ در دو جهت مماسی و شعاعی و سختی) بررسی شدند. در این آزمایش از استانداردهای ISO 3129 و ASTM (D143) به‌ترتیب برای انجام آزمایش‌های فیزیکی و مکانیکی استفاده شد. رطوبت کلیه نمونه‌ها در هنگام انجام آزمایش‌های مکانیکی 12 درصد بود. متوسط دانسیته­ خشک به‌دست‌آمده از چوب راش سنگده و گرجستان به‌ترتیب برابر با 0.616 و 0.65 گرم­بر سانتی­متر مکعب بود. نتایج نشان داد که تفاوت معنی­داری بین خصوصیات فیزیکی و مکانیکی این دو راش مورد استفاده، بعد از آزمون (T-test) به جز دانسیته بحرانی، هم­کشیدگی شعاعی و واکشیدگی شعاعی مشاهده شد. همچنین مقاومت‌های مکانیکی اندازه­گیری شده الوارهای راش گرجستان بسیار بالاتر از چوب راش سنگده بود که به دانسیته بالاتر الوار راش گرجستان نسبت داده شد.}, keywords_fa = {چوب راش,دانسیته,خصوصیات فیزیکی,خصوصیات مکانیکی}, url = {https://karafan.tvu.ac.ir/article_134285.html}, eprint = {https://karafan.tvu.ac.ir/article_134285_47d00568b665af02debda26c9d560f61.pdf} }