Karafan Journal

Volume & Issue: Volume 22, Issue 3, Autumn 2025 (Technical and Engineering)

Number of Articles: 16

The effect of Köppen-Geiger climatic conditions on the design of nearly zero energy buildings

Pages 13-41

10.48301/kssa.2025.459993.2921

Vahid Rezaee, Mojtab masomnezhad

Investigating the thermal comfort efficiency of a thrombus wall in certain conditions according to the geographical location

Pages 42-64

10.48301/kssa.2024.468618.2946

Mohammad Omidpanah

An applied study aimed at reducing gas leakage from the low-pressure section of natural gas regulators using numerical simulation

Pages 65-86

10.48301/kssa.2025.477636.2990

seyed sharafoddin hosseini, Mehdi Miansari, seyed kazem ebrahimnia, Mehdi Eisapour

Evaluation of the amount of injection in the injector needles of the diesel common rail fueling system using the Bosch method

Pages 87-106

10.48301/kssa.2024.470891.2962

mojtaba foroozandehnasab, mohammadkazem khosravani

Investigating the effect of the life of gasoline cars on the CO and HC pollutants emitted from them: A case study in Guilan province

Pages 107-122

10.48301/kssa.2024.472130.2965

Mojtaba Masoumnezhad, Mehdi Niajalili, Seyedeh Atefeh Mousavi Eshkevari

In-vitro study and analysis of performance of diesel engines using biodiesel at a quarter throttle

Pages 123-143

10.48301/kssa.2024.461943.2929

Esmail Haghgoo, Mohammad Salehpour, Ali Alijani, Admin Kazemi

Design a cable robot for lower limb rehabilitation using impedance control approach

Pages 144-172

10.48301/kssa.2025.476145.2978

Farhad Rezvani, Hamid reza Mohammadi Daniali, khodabakhsh Javanshir

Experimental analysis of the influence of input parameters on surface roughness and roughing time in the the honing plateau

Pages 173-192

10.48301/kssa.2024.456406.2902

Naser Shokrollahi, Mohammad Reza Shabgard, Kamal Jahani

Investigating the effect of loading rate and compressive strength on flexural failure modes of RC beam under impact load by numerical analysis method

Pages 193-218

10.48301/kssa.2025.476674.2985

Ahmad Rahmati Alaei, Seyed Mohammad Hosein Khatami

Investigating the uncertainty in calculating the bearing capacity of helical piles by considering different behavior modes using the Monte Carlo method.

Pages 219-243

10.48301/kssa.2025.453252.2960

hamed rahmati, Mohammad hossein bagheripour

Presenting a model and new software in the root cause analysis (RCA) of workplace accidents (case study: RCA of mine bench collapse accident)

Pages 244-266

10.48301/kssa.2025.488404.3045

hossein jarrahi, afshin khoddami, abbasali sadeghi

Hybrid model of Least Square-Support Vector Machine and Particle Swarm Optimization for prediction of pavement International Roughness Index

Pages 267-286

10.48301/kssa.2025.499285.3119

Morteza Araghi, Mohsen Khatibinia, Sadegh Moodi

Experimental Laboratory Investigation of Twisted Basalt Fibers with Varying Inclination Angles in Pull-out Tests with Different Embedded Lengths

Pages 287-313

10.48301/kssa.2025.508396.3152

Hesammodin Nasaj Moghadam, Farshid Jandaghi Alaee

Feasibility of Stabilization of Granular Soil with Geopolymer and Nano Polymer - Laboratory and Microstructural Study

Pages 314-334

10.48301/kssa.2024.468457.2945

Mojtaba Jafari Kermanipour, Mohammad Hossein Bagheripour

Agent-Based Simulation for Reducing Pollution and Delay at Signalized Intersections

Pages 335-355

10.48301/kssa.2025.494106.3086

Farzad Azhari, Amir Abbas Rassafi, Nasser Pourmoallem

Measurement and investigation of nonlinear optical properties of nickel nanoparticles prepared by ionic reduction method

Pages 356-377

10.48301/kssa.2023.379349.2399

Esmaeil Shahriari

Journal Archive

Volume 22 (2025)

Issue 4

Agriculture / Art and Architecture

Issue 3

Technical and Engineering

Special Issue

Humanities

Issue 2

Humanities

Issue 1

Technical and Engineering

Volume 21 (2024)

Volume 20 (2023)

Volume 19 (2022)

Volume 18 (2021)

Volume 17 (2020)

Volume 16 (2019)

Volume 15 (2018)

Volume 14 (2017)

Volume 13 (2017)