[1] Sansaniwal, S. K., Sharma, V., & Mathur, J. (2018). Energy and exergy analyses of various typical solar energy applications: A comprehensive review.
Renewable and Sustainable Energy Reviews,
82(4), 1576-1601.
https://doi.org/10.1016/j.rser.2017.07.003
[2] Zahedi, R., Ahmadi, A., & Sadeh, M. (2021). Investigation of the load management and environmental impact of the hybrid cogeneration of the wind power plant and fuel cell.
Energy Reports,
7(7), 2930-2939.
https://doi.org/10.1016/j.egyr.2021.05.008
[3] Li, Z. X., Shahsavar, A., Al-Rashed, A. A. A. A., Kalbasi, R., Afrand, M., & Talebizadehsardari, P. (2019). Multi-objective energy and exergy optimization of different configurations of hybrid earth-air heat exchanger and building integrated photovoltaic/thermal system.
Energy Conversion and Management,
195(9), 1098-1110.
https://doi.org/10.1016/j. enconman.2019.05.074
[4] Parsa, S. M., Rahbar, A., Javadi Y, D., Koleini, M. H., Afrand, M., & Amidpour, M. (2020). Energy-matrices, exergy, economic, environmental, exergoeconomic, enviroeconomic, and heat transfer (6E/HT) analysis of two passive/active solar still water desalination nearly 4000m: Altitude concept.
Journal of Cleaner Production,
261, 121243.
https: //doi.org/10.1016/j.jclepro.2020.121243
[5] Parsa, S. M., Rahbar, A., Koleini, M. H., Aberoumand, S., Afrand, M., & Amidpour, M. (2020). A renewable energy-driven thermoelectric-utilized solar still with external condenser loaded by silver/nanofluid for simultaneously water disinfection and desalination.
Desalination,
480, 114354.
https://doi.org/10.1016/j.desal.2020.114354
[6] Afrand, M., Shahsavar, A., Sardari, P. T., Sopian, K., & Salehipour, H. (2019). Energy and exergy analysis of two novel hybrid solar photovoltaic geothermal energy systems incorporating a building integrated photovoltaic thermal system and an earth air heat exchanger system.
Solar Energy,
188(8), 83-95.
https://doi.org/10.1016/j.solener.20 19.05.080
[7] Rostami, S., Afrand, M., Shahsavar, A., Sheikholeslami, M., Kalbasi, R., Aghakhani, S., Shadloo, M. S., & Oztop, H. F. (2020). A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage.
Energy,
211(5), 118698.
https://doi.org/10.1016/j.energy.2020.118698
[8] Shahsavar, A. (2021). Experimental evaluation of energy and exergy performance of a nanofluid-based photovoltaic/thermal system equipped with a sheet-and-sinusoidal serpentine tube collector.
Journal of Cleaner Production,
287, 125064.
https://doi.org/10.1016/j.jcl epro.2020.125064
[9] Sohani, A., Shahverdian, M. H., Sayyaadi, H., Samiezadeh, S., Doranehgard, M. H., Nizetic, S., & Karimi, N. (2021). Selecting the best nanofluid type for A photovoltaic thermal (PV/T) system based on reliability, efficiency, energy, economic, and environmental criteria.
Journal of the Taiwan Institute of Chemical Engineers,
124, 351-358.
https: //doi.org/10.1016/j.jtice.2021.02.027
[10] Korres, D., & Tzivanidis, C. (2018). A new mini-CPC with a U-type evacuated tube under thermal and optical investigation.
Renewable energy,
128, 529-540.
https://doi.org/1 0.1016/j.renene.2017.06.054
[11] Subramani, J., Nagarajan, P. K., Mahian, O., & Sathyamurthy, R. (2018). Efficiency and heat transfer improvements in a parabolic trough solar collector using TiO2 nanofluids under turbulent flow regime.
Renewable energy,
119, 19-31.
https://doi.org/10.1016/j.rene ne.2017.11.079
[12] Bellos, E., & Tzivanidis, C. (2019). Thermal efficiency enhancement of nanofluid-based parabolic trough collectors.
Journal of Thermal Analysis and Calorimetry,
135(1), 597-608.
https://doi.org/10.1007/s10973-018-7056-7
[13] Ebrazeh, S., & Sheikholeslami, M. (2020). Applications of nanomaterial for parabolic trough collector.
Powder Technology,
375(6), 472-492.
https://doi.org/10.1016/j.powtec.2 020.08.005
[14] Ranga Babu, J. A., Kumar, K. K., & Srinivasa Rao, S. (2017). State-of-art review on hybrid nanofluids.
Renewable and Sustainable Energy Reviews,
77, 551-565.
https://doi.or g/10.1016/j.rser.2017.04.040
[15] Che Sidik, N. A., Mahmud Jamil, M., Aziz Japar, W. M. A., & Muhammad Adamu, I. (2017). A review on preparation methods, stability and applications of hybrid nanofluids.
Renewable and Sustainable Energy Reviews,
80, 1112-1122.
https://doi.org/10.1016/j.rser.201 7.05.221
[16] Al-Oran, O., Lezsovits, F., & Aljawabrah, A. (2020). Exergy and energy amelioration for parabolic trough collector using mono and hybrid nanofluids.
Journal of Thermal Analysis and Calorimetry,
140(3), 1579-1596.
https://doi.org/10.1007/s10973-020-09371-x
[17] Minea, A. A., & El-Maghlany, W. M. (2018). Influence of hybrid nanofluids on the performance of parabolic trough collectors in solar thermal systems: Recent findings and numerical comparison.
Renewable energy,
120, 350-364.
https://doi.org/10.1016/j.renene.201 7.12.093
[18] Ekiciler, R., Arslan, K., Turgut, O., & Kurşun, B. (2021). Effect of hybrid nanofluid on heat transfer performance of parabolic trough solar collector receiver.
Journal of Thermal Analysis and Calorimetry,
143(2), 1637-1654.
https://doi.org/10.1007/s10973-020-09717-5
[19] Ajbar, W., Hernández, J. A., Parrales, A., & Torres, L. (2023). Thermal efficiency improvement of parabolic trough solar collector using different kinds of hybrid nanofluids.
Case Studies in Thermal Engineering,
42, 102759.
https://doi.org/10.1016/j.csite.2023.102759
[20] Duffie, J. A., Beckman, W. A., & Blair, N. (2020).
Solar engineering of thermal processes, photovoltaics and wind (5 ed.). John Wiley & Sons.
https://doi.org/10.1002/978111 9540328
[21] Behar, O., Khellaf, A., & Mohammedi, K. (2015). A novel parabolic trough solar collector model – Validation with experimental data and comparison to Engineering Equation Solver (EES).
Energy Conversion and Management,
106, 268-281.
https://doi.org/1 0.1016/j.enconman.2015.09.045
[22] Swinbank, W. C. (1963). Long-wave radiation from clear skies.
Quarterly Journal of the Royal Meteorological Society,
89(381), 339-348.
https://doi.org/10.1002/qj.497089 38105
[23] Qiu, Y., Li, M-J., He, Y-L., & Tao, W-Q. (2017). Thermal performance analysis of a parabolic trough solar collector using supercritical CO2 as heat transfer fluid under non-uniform solar flux.
Applied Thermal Engineering,
115, 1255-1265.
https://doi.org/10.1016/j. applthermaleng.2016.09.044
[24] Okonkwo, E. C., Wole-Osho, I., Kavaz, D., & Abid, M. (2019). Comparison of experimental and theoretical methods of obtaining the thermal properties of alumina/iron mono and hybrid nanofluids.
Journal of Molecular Liquids,
292, 111377.
https://doi.org/10.10 16/j.molliq.2019.111377
