[1] He, X., & Lu, Z. (2019). Seismic fragility assessment of a super tall building with hybrid control strategy using IDA method.
Soil Dynamics and Earthquake Engineering,
123(3), 278-291.
https://doi.org/10.1016/j.soildyn.2019.05.003
[3] Hariri-Ardebili, M. A., Sattar, S., & Estekanchi, H. E. (2014). Performance-based seismic assessment of steel frames using endurance time analysis.
Engineering Structures,
69(3), 216-234.
https://doi.org/10.1016/j.engstruct.2014.03.019
[4] Jouneghani, H. G., & Haghollahi, A. (2020). Assessing the seismic behavior of steel moment frames equipped by elliptical brace through incremental dynamic analysis (IDA).
Earthquake Engineering and Engineering Vibration,
19(2), 435-449.
https://doi.org /10.1007/s11803-020-0572-z
[5] Mohsenian, V., Filizadeh, R., Hajirasouliha, I., & Garcia, R. (2021). Seismic performance assessment of eccentrically braced steel frames with energy-absorbing links under sequential earthquakes.
Journal of Building Engineering,
33, 101576.
https://doi.org /10.1016/j.jobe.2020.101576
[6] Mohammadi, M., Mirzaei, M., & Pashaie, M. R. (2021). Seismic performance and fragility analysis of infilled steel frame structures using a new multi-strut model.
Structures,
34(3), 1403-1415.
https://doi.org/10.1016/j.istruc.2021.08.015
[7] Moradi, M., & Abdolmohammadi, M. (2020). Seismic fragility evaluation of a diagrid structure based on energy method.
Journal of Constructional Steel Research,
174(10), 106311.
https://doi.org/10.1016/j.jcsr.2020.106311
[8] Goodarzi, M. J., & Moradi, M. (2022). Evaluation of Seismic Performance of Dual Flexural Frame with Eccentric Bracing, Horizontal Shear and Flexural Link in Consideration of the Effect of Soil-Structure Interaction under Near Field Record.
Karafan Quarterly Scientific Journal,
19(3), 477-500.
https://doi.org/10.48301/kssa.2022.326213.1968
[9] Moradi, M., Tavakoli, H., & AbdollahZade, G. (2020). Sensitivity analysis of the failure time of reinforcement concrete frame under postearthquake fire loading.
Structural Concrete,
21(2), 625-641.
https://doi.org/10.1002/suco.201900165
[10] Bojórquez, E., Terán-Gilmore, A., Ruiz, S. E., & Reyes-Salazar, A. (2011). Evaluation of Structural Reliability of Steel Frames: Interstory Drift versus Plastic Hysteretic Energy.
Earthquake Spectra,
27(3), 661-682.
https://doi.org/10.1193/1.3609856
[20] Porter, K. A., Beck, J. L., & Shaikhutdinov, R. V. (2002). Sensitivity of Building Loss Estimates to Major Uncertain Variables.
Earthquake Spectra,
18(4), 719-743.
https: //doi.org/10.1193/1.1516201
[21] Lee, T-H., & Mosalam, K. M. (2005). Seismic demand sensitivity of reinforced concrete shear-wall building using FOSM method.
Earthquake Engineering & Structural Dynamics,
34(14), 1719-1736.
https://doi.org/10.1002/eqe.506
[22] Rasouli, S., & Latifi, M. K. (2022). Numerical Study of the Combination of Steel Shear Wall with Eccentric Bracing Under Cyclic Loads.
Karafan Quarterly Scientific Journal,
19(3), 393-412.
https://doi.org/10.48301/kssa.2022.299081.1689
[23] Permanent Committee for Revisionof Building Regulations Against Earthquakes. (2014).
Design regulations for buildings against earthquakes (2800 Standard). Bhrc.
https:/ /www.bhrc.ac.ir/news/ID/1890
[25] Caprili, S., Mussini, N., & Salvatore, W. (2018). Experimental and numerical assessment of EBF structures with shear links.
Steel and Composite Structures,
28(2), 123-138.
https://doi.org/10.12989/scs.2018.28.2.123