[7] Jablonka, K., Glovnea, R., & Bongaerts, J. (2018). Quantitative measurements of film thickness in a radially loaded deep-groove ball bearing.
Tribology International,
119, 239-249.
https://doi.org/10.1016/j.triboint.2017.11.001
[8] Wittek, E., Kriese, M., Tischmacher, H., Gattermann, S., Ponick, B., & Poll, G. (2010, September 6-8).
Capacitances and lubricant film thicknesses of motor bearings under different operating conditions. The XIX International Conference on Electrical Machines - ICEM 2010, Rome, Italy
https://doi.org/10.1109/ICELMACH.2010.5608142
[9] Lugt, P. M., Velickov, S., & Tripp, J. H. (2009). On the Chaotic Behavior of Grease Lubrication in Rolling Bearings.
Tribology Transactions,
52(5), 581-590.
https://d oi.org/110402000902825713
[10] Zhou, Y., Bosman, R., & Lugt, P. M. (2019). An Experimental Study on Film Thickness in a Rolling Bearing for Fresh and Mechanically Aged Lubricating Greases.
Tribology Transactions,
62(4), 557-566.
https://doi.org/10.1080/10402004.2018.1539202
[11] Zhang, X., Glovnea, R., Morales-Espejel, G. E., & Félix-Quiñonez, A. (2020). The Effect of Working Parameters upon Elastohydrodynamic Film Thickness Under Periodic Load Variation.
Tribology Letters,
68(2), 1-10.
https://doi.org/10.1007/s1 1249-020-01303-y
[17] Dong, D., Komoriya, T., Endo, T., & Kimura, Y. (2009, September 6-11).
Formation of EHL Film with Grease in Ball Bearings at Low Speeds. World Tribology Congress 2009, Kyoto, Japan.
https://www.jstage.jst.go.jp/article/tribologist/57/8/57_57.08_568/_a rticle/-char/en
[18] Cyriac, F., Lugt, P. M., Bosman, R., Padberg, C. J., & Venner, C. H. (2016). Effect of Thickener Particle Geometry and Concentration on the Grease EHL Film Thickness at Medium Speeds.
Tribology Letters,
61(2), 1-13.
https://doi.org/10.1007/s11249-015-0633-z
[19] Organización Internacional de Normalización. (2007).
Rolling bearings: Dynamic load ratings and rating life (ISO 281:2007). International Organization for Standardization.
https://www.iso.org/standard/38102.html
[23] Li, J., Ma, Z., & Chen, W. (2016). Effects of oil film properties on roller bearing with light loads under various slip factors.
Vibroengineering Procedia,
10, 392-397.
htt ps://www.extrica.com/article/17836
[26] Hassani Khorshidi, F., Azizi, M., Zare Hossein Abadi, H., & Faezipour, M. (2020). Identification and Explanation of Cleaner Production Indicators and Solutions in Medium Density Fiberboard (MDF) Factory.
Karafan Quarterly Scientific Journal,
17(2), 65-79.
https://doi. org/10.48301/kssa.2020.119213