[1] Azdast, T., & Hasanzadeh, R. (2018). Tensile and morphological properties of microcellular polymeric nanocomposite foams reinforced with multi-walled carbon nanotubes. International Journal of Engineering, 31(3), 504-510.
[2] Fakirov, S. (2006). Handbook of condensation thermoplastic elastomers. John Wiley & Sons. https://onlinelibrary.wiley.com/doi/book/10.1002/3527606610
[3] Amin, S., & Amin, M. (2011). Thermoplastic elastomeric (TPE) materials and their use in outdoor electrical insulation. Rev. Adv. Mater. Sci, 29(1), 30-115.
[4] Lim, S.-H., Dasari, A., Yu, Z.-Z., Mai, Y.-W., Liu, S., & Yong, M. S. (2007). Fracture toughness of nylon 6/organoclay/elastomer nanocomposites. Composites Science and Technology, 67(14), 2914-2923. https://doi.org/10.1016/j.compscitech.2007.05.007
[5] Yasemian, A. R. (2018). Synthesis of Iron Oxide Nanoparticles and Evaluation of the Effect of Concentration on Magnetic Hyperthermia. Karafan Quarterly Scientific Journal, 15(44), 127-136.
[6] Asadi Boroojeni, B., & Mozafari Vanani, L. (2020). The effect of tool geometry on the tensile strength of polypropylene Components Welded by Friction Stir Welding Method. Karafan Quarterly Scientific Journal, 17(1), 143-155. https://doi.org /10. 48301/kssa.2020.112761
[7] Fagundes, E., & Jacobi, M. A. (2012). PA/NBR TPVs: crosslink system and properties. Polímeros, 22(2), 206-212. https://doi.org/10.1590/S0104-14282012005000021
[8]Mahallati, P., Arefazar, A., & Naderi, G. (2010). Thermoplastic elastomer nanocomposites based on PA6/NBR. International Polymer Processing, 25(2), 132-138. https://doi.org/10.3139/217.2311
[9] Mehrabzadeh, M., & Delfan, N. (2000). Thermoplastic elastomers of butadieneâacrylonitrile copolymer and polyamide. Vi. Dynamic crosslinking by different systems. Journal of applied polymer science, 77(9), 2057-2066. https://doi.org/10.1002/1097-4628(20000829)
[10] Taghizadeh, E., Naderi, G., & Razavi-Nouri, M. (2011). Effects of organoclay on the mechanical properties and microstructure of PA6/ECO blend. Polymer Testing, 30(3), 327-334. https://doi.org/10.1016/j.polymertesting.2011.01.007
[11] Ghasemi, F. A., Daneshpayeh, S., Ghasemi, I., & Ayaz, M. (2016). An investigation on the Young’s modulus and impact strength of nanocomposites based on polypropylene/linear low-density polyethylene/titan dioxide (PP/LLDPE/TiO 2) using response surface methodology. Polymer Bulletin, 73(6), 1741-1760. https://doi.org/10.1007/s00289-015-1574-2
[12] Moghri, M., Zanjanijam, A. R., Seifi, L., & Ramezani, M. (2017). An investigation on rheological behavior of the PVC/NBR/Nanoclay nanocomposites by torque rheometry: the effects of formulation variables using response surface approach. Journal of Inorganic and Organometallic Polymers and Materials, 27(1), 264-273. https://doi.org/10.1007/s10904-017-0682-x
[13] Nakhaei, M. R., Naderi, G., & Ebrahimpour, A. (2020). Mathematical modeling of mechanical properties of PA6/NBR/Clay Nanocomposites Fabrication using the Thermal Friction Stirs Processing. Journal of Science and Technology of Composites, 7(2), 833-842. https://doi.org/10.22068/jstc.2020.112864.1582
[14] Mostafapour, A., Akbari, A., & Nakhaei, M. (2017). Application of response surface methodology for optimization of pulsating blank holder parameters in deep drawing process of Al 1050 rectangular parts. The International Journal of Advanced Manufacturing Technology, 91(1-4), 731-737. https://doi.org/10.1007/ s00170-016-9781-z
[15] Mostafapour, A., Naderi, G., & Nakhaei, M. R. (2018). Effect of process parameters on fracture toughness of PP/EPDM/nanoclay nanocomposite fabricated by novel method of heat assisted friction stir processing. Polymer Composites, 39(7), 2336-2346. https://doi.org/10.1002/pc.24214
[16] Zhang, Y., Zhang, X., Yang, L., & Yu, X. (2019). Optimization design for downhole dynamic seal based on response surface method. Advances in Mechanical Engineering, 11(2), 1687814019828441. https://doi.org/10.1177/1687814019828441
[17] Kumar, N., & Bandyopadhyay, A. (2017). Simulation of the Effects of Input Parameters on Weld Quality in Laser Transmission Welding (LTW) Using a Combined Response Surface Methodology (RSM)-Finite Element Method (FEM) Approach. Lasers in Engineering (Old City Publishing), 36(4), 225-243.
[18] Mamaghani Shishavan, S., Azdast, T., Mohammadi Aghdam, K., Hasanzadeh, R., Moradian, M., & Daryadel, M. (2018). Effect of different nanoparticles and friction stir process parameters on surface hardness and morphology of acrylonitrile butadiene styrene. International Journal of Engineering, 31(7), 1117-1122. https://doi.org/10.5829/ije.2018.31.07a.16
[19] Paran, S. M. R., Naderi, G., Ghoreishy, M. H. R., & Dubois, C. (2018). Essential work of fracture and failure mechanisms in dynamically vulcanized thermoplastic elastomer nanocomposites based on PA6/NBR/XNBR-grafted HNTs. Engineering Fracture Mechanics, 200, 251-262. https://doi.org/10.1016/j.engfracmech.2018.07.018
[20] Taghizadeh, E., Naderi, G., & Dubois, C. (2010). Rheological and morphological properties of PA6/ECO nanocomposites. Rheologica acta, 49(10), 1015-1027. https://doi.org/10.1007/s00397-010-0476-3
[21] Paran, S. M. R., Naderi, G., & Ghoreishy, M. H. R. (2016). Effect of halloysite nanotube on microstructure, rheological and mechanical properties of dynamically vulcanized PA6/NBR thermoplastic vulcanizates. Soft Materials, 14(3), 127-139. https://doi.org/10.1080/1539445X.2016.1157694
[22] Nakhaei, M. R., & Naderi, G. (2020). Modeling and Optimization of Mechanical Properties of PA6/NBR/Graphene Nanocomposite Using Central Composite Design. International Journal of Engineering, 33(9), 1803-1810. https://doi.org/ 10.5829/ije.2020.33.09c.15
[23] Gaitonde, V. N., Karnik, S. R., & Davim, J. P. (2009). Some Studies in Metal Matrix Composites Machining using Response Surface Methodology. Journal of Reinforced Plastics and Composites, 28(20), 2445-2457. https://doi.org/10.1177/ 0731684408092375
[24] Esmizadeh, E., Irani, A., Naderi, G., Ghoreishy, M. H. R., & Dobious, C. (2018). Effect of carbon nanotube on PA6/ECO composites: Morphology development, rheological, and thermal properties. Journal of applied polymer science, 135(12), 459-477. https://doi.org/10.1002/app.45977