[2] Belabdelouahab, F., Trouzine, H., Hellal, H., Rahali, B., Kaci, S. O., & Medine, M. (2018). Comparative analysis of estimated young’s modulus of rubberized mortar and concrete.
International Journal of Civil Engineering,
16(2), 243-253.
https://d oi.org/10.1007/s40999-016-0119-x
[4] Medine, M., Trouzine, H., & Aguiar, J. (2016). Fresh state properties of concrete incorporating scrap tire rubber.
Periodica Polytechnica Civil Engineering,
60(4), 611-617.
https://doi.org/10.3311/PPci.8727
[5] Medine, M., Trouzine, H., De Aguiar, J. B., & Asroun, A. (2018). Durability Properties of Five Years Aged Lightweight Concretes Containing Rubber Aggregates.
Periodica Polytechnica Civil Engineering,
62(2), 386-397.
https://doi.org/10.3311/ PPci.11363
[6] Youssf, O., ElGawady, M. A., Mills, J. E., & Ma, X. (2014). An experimental investigation of crumb rubber concrete confined by fibre reinforced polymer tubes.
Construction and Building Materials,
53, 522-532.
https://doi.org/10.1016/j.conbu ildmat.2013.12.007
[9] Shah, A. A., Ribakov, Y., & Zhang, C. (2013). Efficiency and sensitivity of linear and non-linear ultrasonics to identifying micro and macro-scale defects in concrete.
Materials & Design,
50, 905-916.
https://doi.org/10.1016/j.matdes.2013.03.079
[11] Topçu, İ. B., & Sarıdemir, M. (2008). Prediction of rubberized mortar properties using artificial neural network and fuzzy logic.
Journal of Materials Processing Technology,
199(1-3), 108-118.
https://doi.org/10.1016/j.jmatprotec.2007.08.042
[12] Gesoğlu, M., Güneyisi, E., Ozturan, T., & Özbay, E. (2010). Modeling the mechanical properties of rubberized concretes by neural network and genetic programming.
Materials and Structures,
43(1), 31-45.
https://doi.org/10.1617/s11527-009-9468-0
[13] Gupta, T., Patel, K. A., Siddique, S., Sharma, R. K., & Chaudhary, S. (2019). Prediction of mechanical properties of rubberised concrete exposed to elevated temperature using ANN.
Measurement,
147, 106870.
https://doi.org/10.1016/j.mea surement.2019.106870
[14] El-Khoja, A., Ashour, A., Abdalhmid, J., Dai, X., & Khan, A. (2018). Prediction of Rubberised Concrete Strength by Using Artificial Neural Networks.
training,
12(11), 35.
https://doi.org/10.5281/zenodo.2021549
[15] Hadzima-Nyarko, M., Nyarko, E. K., Ademović, N., Miličević, I., & Kalman Šipoš, T. (2019). Modelling the Influence of Waste Rubber on Compressive Strength of Concrete by Artificial Neural Networks.
Materials,
12(4), 561.
https://doi.org/10.3 390/ma12040561
[16] Saeb, A., Sohrabi, M., Ghasemi, M., & Ahani, G. (2011, April 26-27).
Prediction of compressive strength of concrete containing crumb rubber using fuzzy neural model and artificial neural networks. 6th National Congress of Civil Engineering, Semnan, Iran.
https://civilica.com/doc/120359/
[17] Sun, Y., Li, G., Zhang, J., & Qian, D. (2019). Prediction of the Strength of Rubberized Concrete by an Evolved Random Forest Model.
Advances in Civil Engineering,
2019, 1-7.
https://doi.org/10.1155/2019/5198583
[18] Jalal, M., Grasley, Z., Bullard, J., & Gurganus, C. (2020). A new nonlinear formulation-based prediction approach using artificial neural network (ANN) model for rubberized cement composite.
Engineering with Computers, 1-18.
https: //doi.org/10.1007/s00366-020-01054-3
[19] Uygunoğlu, T., & Topçu, İ. B. (2010). The role of scrap rubber particles on the drying shrinkage and mechanical properties of self-consolidating mortars.
Construction and Building Materials,
24(7), 1141-1150.
https://doi.org/10.1016/j.conbuildmat.2 009.12.027
[20] Turatsinze, A., & Garros, M. (2008). On the modulus of elasticity and strain capacity of Self-Compacting Concrete incorporating rubber aggregates.
Resources, Conservation and Recycling,
52(10), 1209-1215.
https://doi.org/10.1016/j.resconre c.2008.06.012
[22] Naderpour, H., Kheyroddin, A., & Amiri, G. G. (2010). Prediction of FRP-confined compressive strength of concrete using artificial neural networks.
Composite Structures,
92(12), 2817-2829.
https://doi.org/10.1016/j.compstruct.2010.04.008
[23] Jariwala, V. H., Patel, P. V., & Purohit, S. P. (2013). Strengthening of RC Beams Subjected to Combined Torsion and Bending with GFRP Composites.
Procedia Engineering,
51(4), 282-289.
https://doi.org/10.1016/j.proeng.2013.01.038
[24] Cuong Ho, A. (2010).
Optimisation de la composition et caractérisation d'un béton incorporant des granulats issus du broyage de pneus usagés. : application aux éléments de grande surface [Doctoral, National Institute of Applied Sciences of Toulouse]. Toulouse, France.
https://www.theses.fr/2010ISAT0024
[26] Gesoglu, M., Güneyisi, E., Hansu, O., İpek, S., & Asaad, D. S. (2015). Influence of waste rubber utilization on the fracture and steel–concrete bond strength properties of concrete.
Construction and Building Materials,
101, 1113-1121.
https://doi.org/ 10.1016/j.conbuildmat.2015.10.030
[27] Nguyen, T. H., Toumi, A., & Turatsinze, A. (2010). Mechanical properties of steel fibre reinforced and rubberised cement-based mortars.
Materials & Design,
31(1), 641-647.
https://doi.org/10.1016/j.matdes.2009.05.006
[30] Bachir, R., Sidi Mohammed, A. M., & Habib, T. (2018). Using Artificial Neural Networks Approach to Estimate Compressive Strength for Rubberized Concrete.
Periodica Polytechnica Civil Engineering,
62(4), 858-865.
https://doi.org/10.3311/ PPci.11928