References
[1] Kilic, M., Hiziroglu, S., & Burdurlu, E. (2006). Effect of machining on surface roughness of wood.
Building and Environment,
41(8), 1074-1078.
https://doi.org/10.1016/j.bu ildenv.2005.05.008
[2] Simsek, H., & Baysal, E. (2015). Some Physical and Mechanical Properties of Borate-Treated Oriental Beech Wood.
Drvna Industrija,
66(2), 97-103.
https://doi.org/10. 5552/drind.2015.1356
[3] Sandak, J., & Negri, M. (2005). Wood surface roughness–what is it Proceedings of the 17th International Wood Machining Seminar (IWMS 17).
[4] Čekovská, H., Gaff, M., Osvald, A., Kačík, F., Kubs, J., & Kaplan, L. (2017). Fire Resistance of Thermally Modified Spruce Wood.
BioResources,
12(1), 947-959.
https://doi.org/10.15376/biores.12.1.947-959
[5] Salman, S., Pétrissans, A., Thévenon, M. F., Dumarçay, S., Perrin, D., Pollier, B., & Gérardin, P. (2014). Development of new wood treatments combining boron impregnation and thermo modification: effect of additives on boron leachability.
European Journal of Wood and Wood Products,
72(3), 355-365.
https://www. springerprofessional.de/en/development-of-new-wood-treatments-combining-bor o n-impregnation-/5063782
[6] Stark, N. M., White, R. H., Mueller, S. A., & Osswald, T. A. (2010). Evaluation of various fire retardants for use in wood flour–polyethylene composites.
Polymer Degradation and Stability,
95(9), 1903-1910.
https://doi.org/10.1016/j.polymdegra dstab.2010.04.014
[7] Kartal, S. N., Hwang, W.-J., & Imamura, Y. (2007). Water absorption of boron-treated and heat-modified wood.
Journal of Wood Science,
53(5), 454-457.
https://doi.org /10.1007/s10086-007-0877-9
[9] Karlinasari, L., Lestari, A. T., & Priadi, T. (2018). Evaluation of surface roughness and wettability of heat-treated, fast-growing tropical wood species sengon (Paraserianthes falcataria (L.) I.C.Nielsen), jabon (Anthocephalus cadamba (Roxb.) Miq), and acacia (Acacia mangium Willd.).
International Wood Products Journal,
9(3), 142-148.
https://doi.org/10.1080/20426445.2018.1516918
[10] Salca, E.-A., & Hiziroglu, S. (2014). Evaluation of hardness and surface quality of different wood species as function of heat treatment.
Materials & Design (1980-2015),
62, 416-423.
https://doi.org/10.1016/j.matdes.2014.05.029
[11] Aydin, I., & Colakoglu, G. (2005). Effects of surface inactivation, high temperature drying and preservative treatment on surface roughness and colour of alder and beech wood.
Applied Surface Science - APPL SURF SCI,
252(2), 430-440.
https:// doi.org/10.1016/j.apsusc.2005.01.022
[12] Ozdemir, T., Temiz, A., & Aydin, I. (2015). Effect of Wood Preservatives on Surface Properties of Coated Wood.
Advances in Materials Science and Engineering,
2015(9), 631835-631840.
https://doi.org/10.1155/2015/631835
[14] Falkehag, S. I., Marton, J., & Alder, E. (1966, January 1). Chromophores in kraft lignin. In
Lignin structure and reactions (Vol. 59, pp. 75-89). ACS Publications.
https://doi.org/10.1021/ba-1966-0059.ch007
[15] Johansson, C., Saddler, J., & Beatson, R. (2000). Characterization of the Polyphenolics Related to the Colour of Western Red Cedar (Thuja plicata Donn) Heartwood.
Holzforschung,
54(3), 246-254.
https://doi.org/10.1515/HF.2000.042
[16] Gurleyen, L., Ayata, U., Esteves, B., & Cakicier, N. (2017). Effects of heat treatment on the adhesion strength, pendulum hardness, surface roughness, color and glossiness of Scots pine laminated parquet with two different types of UV varnish application.
Maderas. Ciencia y tecnología,
19(2), 213-224.
https://doi.org/10.4067/S0718-221X2017005000019
[17] Sundqvist, B. (2004). Colour changes and acid formation in wood during heating [PhD Dissertation, Lulea University of Technology]. Skellefta, Sweeden.
[18] Van Nguyen, T. H., Nguyen, T. T., Ji, X., & Guo, M. (2018). Predicting color change in wood during heat treatment using an artificial neural network model.
BioResources,
13(3), 6250-6264.
https://doi.org/10.15376/biores.13.3.6250-6264
[19] Sikora, A., Kačík, F., Gaff, M., Vondrová, V., Bubeníková, T., & Kubovský, I. (2018). Impact of thermal modification on color and chemical changes of spruce and oak wood.
Journal of Wood Science,
64(4), 406-416.
https://doi.org/10.1007/s10086-018-1721-0
[20] Sahin Kol, H., Aysal, S., Gündüz Vaydoğan, K., & Çıtak, O. (2017, October).
Investigation of some physical and mechanical properties of heat treated Beech wood impregnated with boric acid and borax in different treatment temperatures Investigation of some physical and mechanical properties of heat treated Beech wood impregnated with boric acid and borax in different treatment temperatures, Barselona, Spain.
https://atif.sobiad.com/index.jsp?modul=makale-detay&Alan= fen&Id=AW4SDfkPyZgeuuwfeCdV
[21] Paul, W., Ohlmeyer, M., & Leithoff, H. (2007). Thermal modification of OSB-strands by a one-step heat pre-treatment - Influence of temperature on weight loss, hygroscopicity and improved fungal resistance.
Holz als Roh- und Werkstoff,
65(1), 57-63.
https://doi.org/10.1007/s00107-006-0146-4
[22] Sernek, M., Boonstra, M., Pizzi, A., Despres, A., & Gérardin, P. (2008). Bonding performance of heat treated wood with structural adhesives.
Holz als Roh-und werkstoff,
66(3), 173-180.
https://doi.org/10.1007/s00107-007-0218-0
[23] Ulker, O., & Hiziroglu, S. (2017). Some Properties of Densified Eastern Redcedar as Function of Heat and Pressure.
Materials,.
10(11), 1275.
https://doi.org/10.3390/ma10111275
[24] Auty, D. (2011). Modelling the effects of forest management on the wood properties and branch characteristics of UK-grown Scots pine [PhD Dissertation, Aberdeen University]. Scotland, UK.
[25] TSE. (1996, November 25 ). TSE - TS 2471 - Wood, Determination of Moisture Content for Physical and Mechanical Tests. In: GlobalSpec Engineering 360.
[26] Aydin, I. (2010). Effects of borate treatments on the properties of spruce veneers and plywood panels. In Handbook on Borates: Chemistry, Production and Application (pp. 349-366). Nova Science Publishers.
[27] Togay, A., Kilic, Y., & Colakoglu, G. (2009). Effects of Impregnation with Timbercare Aqua to Surface Roughness of Some Varnishes.
Journal of Applied Sciences,
9(9).
https://doi.org/10.3923/jas.2009.1719.1725
[28] Tribulova, T., Kačík, F., Evtuguin, D., & Cabalova, I. (2016). Assesment of chromophores in chemically treated and aged wood by UV- Vis diffuse reflectance spectroscopy.
Cellulose Chemistry and Technology,
50(5-6), 659-667.
https://cellu losechemtechnol.ro/pdf/CCT5-6(2016)/p.659-667.pdf
[29] Yao, C., Yongming, F., Jianmin, G., & Houkun, L. (2012). Coloring characteristics of in situ lignin during heat treatment.
Wood Science and Technology,
46(1), 33-40. https://doi.org/10.1007/s00226-010-0388-5
[30] Bekhta, P., & Niemz, P. (2003). Effect of High Temperature on the Change in Color, Dimensional Stability and Mechanical Properties of Spruce Wood.
Holzforschung,
57(5), 539-546.
https://doi.org/10.1515/HF.2003.080
[31] Korkut, S., Akgül, M., & Dündar, T. (2008). The effects of heat treatment on some technological properties of Scots pine (Pinus sylvestris L.) wood.
Bioresource Technology,
99(6), 1861-1868.
https://doi.org/10.1016/j.biortech.2007.03.038
[32] Weiland, J., Guyonnet, R., & Gibert, R. (1998). Analysis of controlled wood burning by combination of thermogravimetric analysis, differential scanning calorimetry and Fourier transform infrared spectroscopy. Journal of thermal analysis and calorimetry, 51(1), 265-274.
[33] Kartal, S. N., Hwang, W.-J., & Imamura, Y. (2008). Combined effect of boron compounds and heat treatments on wood properties: Chemical and strength properties of wood.
Journal of Materials Processing Technology,
198(1-3), 234-240.
https://doi.org/10.1016/j.jmatprotec.2007.07.001
[35] Kúdela, J., & Liptáková, E. (2006). Adhesion of coating materials to wood.
Journal of Adhesion Science and Technology,
20(8), 875-895.
https://doi.org/10.1163/156856 106777638725
[36] Follrich, J., Müller, U., & Gindl, W. (2006). Effects of thermal modification on the adhesion between spruce wood (Picea abies Karst.) and a thermoplastic polymer.
Holz als Roh- und Werkstoff,
64(5), 373-376.
https://doi.org/10.1007/s00107-006-0107-y
[37] Boonstra, M. J., Tjeerdsma, B. F., & Groeneveld, H. A. C. (1998).
Thermal Modification Of Non-durable Wood Species. 1. The Plato Technology: Thermal Modification Of Wood. IRG Secretariat.
https://books.google.com/books?id=sonTzQEACAAJ
[39] Sandlund, A. B. (2004, October).
A study of wood adhesion and interactions using DMTA. Doctoral thesis. Divisions of Wood Material Science [Doctoral Thesis, Division of Wood and Material Science, Lulea University of Technology]. Skellefta, Sweeden.
https://www.traguiden.se/globalassets/forskning/doktorsavhan dlingar/ltu-dt-0449-se.pdf
[40] Frihart, C. R. (2003).
Interaction of copper wood preservatives and adhesives 26th Annual Meeting of the Adhesion Society, Inc. : Adhesion.
https://www.fs.usda.gov/ treesearch/pubs/22137