Karafan Journal

Karafan Journal

Comparing the Anatomical and Biometrical Characteristics of Heartwood and Sapwood of Elaeagnus Angustifolia (Case Study: Khorasan Province)

Document Type : Original Article

Authors
Ali Hassanpoor Tichi 1
Mojtaba Rezanezhad Divekolae 2
Amin Khatiri 2
Mohammad Mahdi Kazemian 2
1 Assistant Professor, Department of wood industry, Technical and Vocational University (TVU), Tehran, Iran.
2 BSc Student, Department of wood industry, Technical and Vocational University (TVU), Tehran, Iran.
10.48301/kssa.2021.129725
Abstract
Investigating changes in biometrics and anatomy of wood species in different parts of tree stems is one of the issues that have been of long interest to researchers in the wood and paper industry. In this study, a comparison of the anatomical and biometrical characteristics of heartwood and sapwood Elaeagnus angustifolia was made. For this purpose, a completely healthy tree native to Khorasan Province, Iran was selected and cut. Test specimens with dimensions of 2 × 2 cm and a length of 3 cm sequentially taken from near the pith (heartwood) to near bark (sapwood) were prepared for biometric and anatomical experiments. Biometric characteristics including fiber length, fiber lumen diameter, fiber diameter and cell wall thickness were evaluated. The results showed that the effect of different parts of the stem on the biometric characteristics of the fibers at the upper level was significant, so that biometric properties had an increasing trend as they moved away from the pith area and neared the bark area. Microscopic studies of wood close to the bark of the elaeagnus angustifolia showed that this species is of the ring porous hardwood species, with distinct growth ring, simple perforation plates and scalariform, alternate intervessel pits and presence of Tyloses.
Keywords
Elaeagnus angustifolia
Ring porous
Alternative pits
Simple perforation
Subjects
[1] Mahdavi, S., Hosseinzadeh, A., Familian, H., & Habibi, M. (2004). Investigation on relation of fiber dimension and wood density with age and ring width in E. camaldulensis Dehnh. Iranian Journal of Wood and Paper Science Research, 19(1), 69-98. https://www.sid.ir/en/journal/ViewPaper.aspx?id=98569
[2] Hosseini Mazhari, S. Z. A.-D., & Naghdi, R. (2004). Evaluation on juvenile period and fiber length variation of maple wood (Acer velutinum Boiss). Journal of Agricultural Science and Natural Resource, 11(2), 7-16. https://www.sid.ir/en/ journal/ViewPaper.aspx?id=30617
[3] Safdari, V. (2010). Morphological and chemical components of Ulmus glabrar, Ulmus compestris, Zelkova carpinifolia, Celtis australis. Iranian Journal of Wood and Paper Science Research, 25(2), 248-259. https://www.sid.ir/en/journal/ViewPaper. aspx?id=253707
[4] Kiaei, M., Bakhshi, R., & Ahangar, M. (2015). Physiicall And Biiomettriic Properttiies Off Euonymus Latifolia Wood (Case Sttudy: Chamesttan-Nour). Iranian Journal of Wood and Paper Industries, 6(2), 239-249. https://www.sid.ir/en/Journal/View Paper.aspx?ID=531118
[5] Hasanpoor Tichi, A., & Rezanezhad, M. (2019). Anatomical, physical and biometric properties of Ficus carica in longitudinal and transverse direction of tree stem. Iranian Journal of Wood and Paper Science Research, 34(2), 228-241. https:// www.sid.ir/en/Journal/ViewPaper.aspx?ID=838496
[6] Hassanpoor Tichi, A., Rezanezhad Divkolae, M., Khatiri, A., & Alizadeh, R. (2020). Investigation of Changing Trends in Morphological and Anatomical Characteristics of fraxinus excelsior in Stem Radial Axis (Case Study: Mazandaran Province). Karafan Quarterly Scientific Journal, 17(2), 81-91. https://doi.org/10.48301/kssa.2020.119214
[7] Franklin, G. (1946). A rapid method of softening wood for microtome sectioning. Tropical woods, 88, 35-36. https://eurekamag.com/research/013/622/013622801.php
[8] Gärtner, H., & Schweingruber, F. (2013). Microscopic Preparation Techniques for Plant Stem Analysis. Verlag Dr. Kessel, Remagen. https://www.researchgate.net/publica tion/253341899_Microscopic_Preparation_Techniques_for_Plant_Stem_Analysis
[9] Wheeler, E., Baas, P., & Gasson, P. (1989). IAWA List of Microcopie Features for Hardwood Identification. International Association of Wood Anatomists (IAWA), 10(3), 219–332. https://www.researchgate.net/publication/294088872_IAWA_List_ of_Microcopie_Features_for_Hardwood_Identification
Karafan Journal
Volume 18, Issue 4 - Serial Number 56
Agriculture / Art & Architecture
Winter 2022
Pages 237-250

  • Receive Date 09 May 2020
  • Revise Date 25 February 2022
  • Accept Date 27 April 2021