@article { author = {Vesali, Mahmood and Abdellahi, Alireza and Ranjbar, Hosein and Rabiei, Mostafa}, title = {A New High Step-Up DC-DC Converter with Soft Switching and High Efficiency}, journal = {Karafan Quarterly Scientific Journal}, volume = {19}, number = {3}, pages = {333-355}, year = {2022}, publisher = {Technical and Vocational University}, issn = {2382-9796}, eissn = {2538-4430}, doi = {10.48301/kssa.2022.345057.2138}, abstract = {This paper presents a high step-up DC-DC converter. The converter had a simple structure and without adding an auxiliary switch, soft switching condition was provided in the converter. Due to the fact that a switch was not added to the converter, there was no need to design a new control circuit for this converter and the basic control circuit structure was suitable for this converter. In the proposed converter, with the minimum number of auxiliary elements soft switching condition provided reduced losses and increased efficiency in addition to having a simple structure. Soft switching condition was provided under zero current switching (ZCS) when the switch was turned on and under zero voltage switching (ZVS) when the switch was turned off. The voltage stress on the switch was at a lower level than the output voltage of the converter which the switch can use with low voltage. In addition, not much current stress was imposed on the converter, which did not require a very high current switch. The proposed converter was completely analyzed and in order to prove the theoretical analysis, the converter was simulated at a power of 500 watts and full load, the efficiency obtained was approximately 97%.}, keywords = {DC,DC converter High step,up Efficiency Zero current switching (ZCS) Zero voltage switching (ZVS)}, title_fa = {یک مبدل بسیار افزاینده DC-DC جدید با کلیدزنی نرم و راندمان بالا}, abstract_fa = {در این مقاله یک مبدل بسیار افزاینده DC-DC ارائه می‌گردد. مبدل، ساختار ساده‌ای دارد و بدون افزودن سوئیچ کمکی شرایط کلیدزنی نرم در مبدل فراهم گردیده است. با توجه به اینکه سوئیچی به مبدل اصلی اضافه نمی‌گردد نیاز به طراحی مدار کنترل جدید برای این مبدل نمی‌باشد و ساختار مدار کنترل پایه برای این مبدل مناسب می‌باشد. در مبدل پیشنهادی با حداقل المان کمکی شرایط کلیدزنی نرم فراهم می‌گردد که علاوه‌بر داشتن ساختار ساده، کاهش تلفات و افزایش راندمان را نیز دارد. کلیدزنی تحت جریان صفر در زمان روشن شدن و تحت ولتاژ صفر در زمان خاموش شدن سوئیچ فراهم می‌گردد. استرس ولتاژ روی سوئیچ نسبت به ولتاژ خروجی مبدل، در سطح پایینی قرار دارد که سوئیچ با تحمل ولتاژ پایین می‌تواند استفاده گردد. همچنین استرس جریان زیادی به سوئیچ تحمیل نمی‌گردد که نیاز به سوئیچ با جریان بسیار زیاد نمی‌باشد. مبدل پیشنهادی به‌طور کامل آنالیز گشت و به منظور اثبات نتایج تئوری، مبدل در توان 500 وات شبیه‌سازی شد و در بار کامل راندمان حدود 97 درصد به‌دست آمد.}, keywords_fa = {مبدل DC,DC بسیار افزاینده راندمان کلیدزنی تحت جریان صفر کلیدزنی تحت ولتاژ صفر}, url = {https://karafan.tvu.ac.ir/article_159570.html}, eprint = {https://karafan.tvu.ac.ir/article_159570_ec415185f3ee769300cfff9843ca1fd4.pdf} }